Large Square Stainless Steel Clamp - Suit Round Post

Suit 8, 10 or 12mm Glass with Round Base for mounting on Round Post. 

 Glass which is held by clamps only by friction can move over time as the glass expands and contracts.  This can be addressed by either using pins though holes in the glass or by using clamps on the bottom corner of each panel.  The retaining plate has a neoprene block which the glass rests on preventing it from moving. 

Material:  316 marine grade Stainless Steel

Dimensions:   55mm(W) x 55(H)mm x 27.5mm (Thick)

Finish:     Mirror, Satin(brushed), Matt or Satin Black  Powdercoated.

Mounting Base: Round Base for mounting on round surfaces (50mm diameter).

Glass Thickness:  8mm, 10mm and 12mm glass.  

Price: Includes GST.

USES:  Glass Ballistrating, Pool Fences, Shelving, Glass Screens, Glass awnings etc

CODE- A1362-316

Please Note: Glass must only be installed in accordance with Australian Standards including AS 1288-1994  Glass in buildings - Selection and installation

Caution should be taken when using this type of clamp without a pin as it only holds the glass by compression which may overtime allow the glass to move within the clamp.   If the glass is not supplied with a hole for the pin then a bottom clamp should be used 

Satin finishes are achieved by "roughening" the surface of the stainless steel. While this surface finish has a unique appearance it can trap dust and other contaminates.

Over time these can stain the stainless steel surface (teatree staining). The build up of contaminates on the stainless steel can be prevented by the application of surface sealers.

Contaminates (and stains) can be 'rejuvenated' by using stainless steel cleaners. 

There are different grades of satin finish, which relate to how deeply the surface is roughened.

Jalex uses a relatively minor satin finish to reduce the extent of contaminate build up, however customers should be aware that even this surface finish will require periodic maintenance with a suitable cleaner. 

Jalex recommends mirror finish for external applications but satin finishes can be used providing the customer accepts there will be a requirement to periodically maintain the surface finish .

For more information on pick up or shipping please contact Craig Jalex Hardware 07 3040 6252 0438 723 079.